NAVIGATION
Company
Facility
Our state of the art manufacturing facility in Phoenix, Arizona was specifically designed for our operations and occupies 65,000 square feet. We meet or exceed all state and federal compliance requirements.
Manufacturing Process
All of our products are inspected from raw goods to finished products. Manufactured to exact standards and undergo multiple inspections throughout the manufacturing process, including AS9100 First Article Inspections.
Industry Qualifications
We understand the importance of product identification and standards, and our quality assurance team can provide appropriate documentation for your needs. We provide Certificates of Compliance (CoCs) to several of our customers in aerospace, defense, medical, military, transportation, or construction industries. Our certificates play critical roles in validating compliance to standards of the DOD, ADA, Military UID, and ISO.
Photo-Chemical Etching
Material Thickness
PMA PHOTOMETALS can etch materials below 1 mil and up to 0.250″.
Part Size
PMA PHOTOMETALS currently etches panels up to 36″ wide x 75″ long.
Materials
Aluminum
Beryllium Copper
Brass
Bronze
Carbon Steel
Copper
Invar
Kovar
Monel
Mu-Metal
Nichrome
Nickel
Nickel Silver
Phosphorous Bronze
Spring Steel
Stainless Steel
Steel
And Others
Depth & Texture
Full Etch
Half Etch
Frost Etch
Flash Etch
Orbital Grain
Directional Grain
Finishes
Matte
Gloss
Semi-Gloss
Satin
Mirror
Frost
Fabrication
Laser & Sabre Services
PMA PHOTOMETALS can process metals using laser technology and industrial sabre saws for cutting most metals like stainless steel, aluminum, steel, copper, brass, and nickel. Our metal cutting services produce consistently accurate parts with highest edge quality possible across a wide range of materials and sheet thicknesses.
Shearing Services
PMA PHOTOMETALS can process metals using automated and manual shearing devices to provide bulk sheets of material with accurate measurements at your request.
STAINLESS STEEL
ALUMINUM
COPPER
BRASS
STEEL
Steel Rule Die Cutting
PMA PHOTOMETALS can produce steel rule dies and provide steel rule die cutting services for your next project.
Parts Up to 10″ x 15″
Anodized Aluminum
Mylar
Adhesive Backed Materials
Other Popular Materials
Corner Radius
PMA PHOTOMETALS offers a variety of finishes including corner radius finishing for your project and provides this service for large and small orders.
From 1/16″ to 3/8″ radius.
Metalphoto®
Material
Anodized Aluminum
Min Thickness: 0.003″
Various Part Sizes
Max Thickness: 0.125″
Dye Colors
Gold
Copper
Blue
Red
Bronze
Green
Rose Gold
Finishes
Matte
Satin
Gloss
Other Services
Screen Printing
PMA PHOTOMETALS offers industrial screen printing of parts as a part of your project, or can provide industrial screen printing services as a stand alone service.
Painting
Utilizing automated and manual processes, PMA PHOTOMETALS can provide professional paint finishing to your project to meet your specifications.
Anodization
Anodizing increases resistance to corrosion and wear, and provides better adhesion for paint primers and glues than bare metal. Most commonly applied to protect aluminum parts, PMA PHOTOMETALS can provide anodization services as part of your project or on a stand alone basis.
Passivation
Passivation is widely-used metal finishing process to prevent corrosion. The chemical treatment leads to a protective oxide layer, or passivation film, that is less likely to chemically react with air and cause corrosion. PMA PHOTOMETALS can provide passivation services for your project or on a stand alone basis.
Packaging Services
PMA PHOTOMETALS provides consumer and industrial packaging services for a number of its customers – both in large quantities and small production runs. We are well equipped to produce your packaging in-house or utilize your packaging from another supplier – either way we can provide you with professional packaging services if you require retail-ready packaging.
